favorite
favorite
hide
unhide
flag

Posted

print

Cad audio equitech e-300 - $400 (Boynton)

Cad audio equitech e-300 1 thumbnailCad audio equitech e-300 2 thumbnailCad audio equitech e-300 3 thumbnailCad audio equitech e-300 4 thumbnail
condition: excellent
make / manufacturer: Cad Audio Equitech
model name / number: E300

more ads by this user

CAD Audio Equitek E-300
Multi-Pattern Condenser Microphone
The Equitek E-300 is a large-diaphragm, multipattern solid-state condenser manufactured in Conneaut, OH by CAD in the late 1990s.
It used a proprietary, center-terminated capsule that was imported from China. A later revision of this microphone, the E-350, used an “Optema” capsule built in CAD’s factory in Conneaut, OH.
As part of the original Equitek product line, the E-300 was powered by a pair of internal rechargeable batteries, and used Op Amps in place of FETs within the amplifier circuit. Its output circuit was transformerless.
Four switches below the headbasket allow the following controls:
* Battery power on/off. The microphone’s internal batteries can be recharged via phantom power, but the actual power for the capsule is delivered by a pair of internal NiCad batteries.
* Polar Pattern: Omni, Figure-of-8, Cardioid
* High-pass filter
* -20dB pad (non-capacitative)
The Equitek E300 combines a vintage capsule design with advanced electronics. Typical FET (field effect transistor) condenser microphones use discrete designs. This means they use individual transistors that must be carefully matched for proper characteristics. Even with careful matching, discrete designs are inherently nonlinear. Equitek microphones use a different approach. We do not use any discrete FETs. Instead, we use advanced high speed OpAmps (Operational Amplifiers). These OpAmps are individually laser trimmed for optimum performance and have very high gain. This allows a large amount of negative feedback to be used to significantly reduce any non-linearity. During transients, these OpAmps may require more current than typical phantom power supplies can deliver. The extra current demands are accommodated by our unique power supply design. Instead of using phantom power to operate the microphone, we use it to charge a pair of rechargeable NiCad batteries. This system creates a huge current reserve for the microphone’s electronics, yet there is no maintenance involved because the microphone automatically keeps the batteries charged during use. The use of OpAmps is not the only unique feature of Equitek microphones. For example, we also employ servo circuitry to minimize DC offset and eliminate interstage coupling capacitors.
carefully matched for proper characteristics. Even with careful matching, discrete designs are inherently nonlinear. Equitek microphones use a different approach. We do not use any discrete FETs. Instead, we use advanced high speed OpAmps (Operational Amplifiers). These OpAmps are individually laser trimmed for optimum performance and have very high gain. This allows a large amount of negative feedback to be used to significantly reduce any non-linearity. During transients, these OpAmps may require more current than typical phantom power supplies can deliver. The extra current demands are accommodated by our unique power supply design. Instead of using phantom power to operate the microphone, we use it to charge a pair of rechargeable NiCad batteries. This system creates a huge current reserve for the microphone’s electronics, yet there is no maintenance involved because the microphone automatically keeps the batteries charged during use. The use of OpAmps is not the only unique feature of Equitek microphones. For example, we also employ servo circuitry to minimize DC offset and eliminate interstage coupling.

Specifications
Pickup Patterns Pads & Filters
Omnidirectional (17.8 mV/Pa; 10 - 20,000 Hz)
CHART Cardioid (17.8 mV/Pa; 10 - 20,000 Hz)
Bidirectional (17.8 mV/Pa; 10 - 20,000 Hz)
Pad: -20dB (Via Switch)
Capsule Dimensions Impedance SPL/Noise
Diaphragm diameter: 28mm
200 Ohms (Low) Self-noise: 11.0 dB(A)
Weight Length Max Diameter Interface(s)
855g (30.16oz) 227mm (8.94'') 63mm (2.48'')
3-pin XLR male (1)
Power Specifications
Requires phantom power
Has battery compartment (NiCad)




post id: 7748426164

posted:

updated:

best of [?]

loading
reading
writing
saving
searching